#VIEWSONIC MONITOR DRIVERS FOR MAC PC#

Identification for each of Display (01~98 default is 01) The Set-Function packet format consists of 9 bytes. The Set-Function command allows you to control the Display behavior at a remote site through the RS-232 port.

#VIEWSONIC MONITOR DRIVERS FOR MAC PC#

The PC can control the Display for specific actions. If the message is received incorrectly it will send “-” (02Dh) followed by “CR” (00Dh).If the message is received correctly it will send “+” (02Bh) followed by “CR” (00Dh).Every time PC sends control command to Display, the Display shall respond as follows: PC sends to LFD command packet followed by “CR”. Slowly roll your eyes to the left, right, up, and down. This exercise reduces the risk of your eyes’ focusing ability to “lock up” after prolonged computer work.Įye exercises can help minimize eye strain. While taking breaks, users can further reduce eye strain and dryness by focusing on objects that are further away from them for 10-15 seconds, then gaze at something up close for 10-15 seconds. To reduce the risk of eye fatigue by constantly looking at the screen, look away from the screen at least every 20 minutes and gaze at a distant object (at least 20 feet away) for at least 20 seconds. Taking shorter, more frequent breaks are generally more beneficial than longer, less frequent breaks. Short breaks of at least 10 minutes are recommended after one (1) hour of continuous viewing. When viewing screens for extended periods, it is recommended to take periodic breaks from viewing. Mode: Standard (Brightness and Contrast are 50).NOTE: To meet TÜV Rheinland low blue light certification, the Display Settings must be: The Blue Light Filter blocks high-energy blue light for a more comfortable viewing experience. Drag the blue light slider directly to adjust the blue light value.Additionally, you can use the remote control and press ▼/▲/◄/► to select a value, then press VOL+/ VOL- to adjust it. Adjust the Brightness, Contrast, Hue, and Sharpness directly by touching and adjusting each value.Press ▼/▲/◄/► on the remote control or directly touch the option to select it.Press MENU on the remote control and select the Display menu.Settings include: Audio, Screen, Display, and Adjust. Press MENU on the remote control or select the setting icon next to the input source in Input Settings to launch the Settings menu. Press ENTER on the remote control, or touch the input source.Press ▼/▲/◄/► to select the input source you want.Press INPUT on the remote control to display the General Setting menu, then press ▼ to enter the Input Source menu.Press Mute on the remote control to enable or disable the mute function.Drag the volume slider directly to adjust the value.Press EXIT on the remote control, or touch a blank area outside of the menu to exit.Drag the brightness slider directly to adjust the backlight value.Press INPUT on the remote control to display the General Settings menu.

Viewsonic monitor drivers for mac